|
Use the Multi_Frac_Split to split an inlet stream into two to five outlet streams.
|
What do you want to see?
|
 |
Data Description
|
Data |
Unit |
Description |
|
Set |
Item |
Type |
Native |
|
Equipment Properties |
First Outlet Fraction |
Fraction or Percent |
Fraction |
Fraction of the total inlet flow in the first outlet flow. |
|
Second Outlet Fraction |
Fraction or Percent |
Fraction |
Fraction of the total inlet flow in the second outlet flow. |
|
Third Outlet Fraction |
Mass FlowFraction or Percent |
Fraction |
Fraction of the total inlet flow in the third outlet flow. |
|
Fourth Outlet Fraction |
Fraction or Percent |
Fraction |
Fraction of the total inlet flow in the fourth outlet flow. |
|
Fifth Outlet Fraction |
Fraction or Percent |
Fraction |
Fraction of the total inlet flow in the fifth outlet flow. |
The model determines the flows in the outlets using the flow fractions you
specify.
The fraction of the inlet stream flow is sent to each of the outlet streams.
The remaining flow is equally distributed to the outlet streams whose fractions
have not been set.
Zero flow entering!
Solution: set the input flow on the steam.
Fractions don't add to 1.0!
Solution: check if the sum of the fractions is 1.
Missing Stream(s)!
Solution: check if all the streams are connected to the equipment.
